汉译英，请各位高手翻译以下句子。杜绝在线翻译！！！

汉译英在线翻译句子~

1. Power Switch
Function is on / off controller working power source.
2. Amplitude modulator
Is used to control the waveform duty cycle to regulate its function is within a certain range to change the vibration amplitude plating on the plating speed from micro-adjustment feature.
3. Velocity regulator
Waveform is used to control the frequency of adjustment, the main function is to adjust speed plating.
4. Insurance Block
10A - Output DC insurance seat, when the overcurrent protection for the components used.
5. 6 terminals
Input for the power supply, while the output control signals to the vibration plate machine.
6. Wiring diagram of the external terminals 6 Figure (D).

五. Instructions
1. Ensure that the vibration plate machine power input line is correct, the normal power supply, reliable, vibration plate fixed to the scaffold;
2. For the first time use, should be amplitude and velocity regulator scale are transferred 0.
3. POWER pull the power switch to the ON state.
4. With adjustable speed and amplitude adjustment potentiometer, so that plating velocity in the setting / best condition for continuous vibration plate.
Note: in the regulation of speed and amplitude adjustment potentiometer, the first edge of the potentiometer a small black body, (called "lock potentiometer settings" button), counter-clockwise to set the drawing state, before they can be carried out on the potentiometer setting and regulation. Adjust to normal, we should "lock potentiometer settings" button in a clockwise direction pulling the lock to ensure that it does not out technical errors, otherwise set the parameters of the drift due to the quality of products would be adversely influence, and in severe damage to the machine so that vibration plate.
5. Shutdown / or stop the vibration plate when the POWER dial directly to the power switch to the OFF position, cut off the power supply controller can be.

六. Fault Detection
1. No vibration, and the power switch POWER indicator light does not shine.
Approach: Are there any power supply; DC fuse is blown.
2. No vibration, but the power switch POWER indicator light.
3. Approach: 1) Check the scale of the amplitude modulator is greater than 4.
2) Check the e-board, components, and whether there is loose wiring, broken.
3) Check the output control signal cable is open circuit.
Other matters: Please refer to the narrative part of mechanical vibration plate machine

7. Notes
1. The controller is strictly prohibited without customs of electricity allocated among the various contact socket;
2. Potentiometer is prohibited under the late unlocking adjustment potentiometer;
3. Abnormal failure can not be excluded, it shall promptly notify the professional staff carry out maintenance operations.



















Figure D 6 terminal wiring diagram
五. Instructions
1. Ensure that the vibration plate machine power input line is correct, the normal power supply, reliable, vibration plate fixed to the scaffold;
2. For the first time use, should be amplitude and velocity regulator scale are transferred 0.
3. POWER pull the power switch to the ON state.
4. With adjustable speed and amplitude adjustment potentiometer, so that plating velocity in the setting / best condition for continuous vibration plate.
Note: in the regulation of speed and amplitude adjustment potentiometer, the first edge of the potentiometer a small black body, (called "lock potentiometer settings" button), counter-clockwise to set the drawing state, before they can be carried out on the potentiometer setting and regulation. Adjust to normal, we should "lock potentiometer settings" button in a clockwise direction pulling the lock to ensure that it does not out technical errors, otherwise set the parameters of the drift due to the quality of products would be adversely influence, and in severe damage to the machine so that vibration plate.
5. Shutdown / or stop the vibration plate when the POWER dial directly to the power switch to the OFF position, cut off the power supply controller can be.

六. Fault Detection
1. No vibration, and the power switch POWER indicator light does not shine.
Approach: Are there any power supply; DC fuse is blown.
2. No vibration, but the power switch POWER indicator light.
3. Approach: 1) Check the scale of the amplitude modulator is greater than 4.
2) Check the e-board, components, and whether there is loose wiring, broken.
3) Check the output control signal cable is open circuit.
Other matters: Please refer to the narrative part of mechanical vibration plate machine

7. Notes
1. The controller is strictly prohibited without customs of electricity allocated among the various contact socket;
2. Potentiometer is prohibited under the late unlocking adjustment potentiometer;
3. Abnormal failure can not be excluded, it shall promptly notify the professional staff carry out maintenance operations.

纳氏试剂光度法测定氨氮影响因素的探讨
摘要：氨氮以游离氨或铵盐形式存在于水中。测定氨氮的方法通常有纳氏比色法、气相分子吸收法、电极法等。纳氏试剂比色法有操作简便、灵敏等特点。本文提出用纳氏试剂光度法测定氨氮的常见问题及解决方法。

Pay reagent luminosity follows the investigation and discussion abstract determining ammonia nitrogen influencing factor: The ammonia nitrogen there exists Yu Shui Zhong in form with free ammonia or ammonium salt. The method determining the ammonia nitrogen has generally pay than color law , the gas appearance molecule absorb law , electrode law etc. Mrs.Pay reagent handle characteristics such as simple and convenient , keen than color law has. The main body of a book is accepted bringing forward use reagent luminosity follows common problem and solution determining the ammonia nitrogen.

关键词：纳氏试剂光度法；氨氮；影响因素

Keywords: Pay reagent luminosity law; Ammonia nitrogen; Influencing factor

这样就可以了。

1.Wait a moment,don't hang up,I go to find your of the ministry,
2.I give you the ministry's phone number,you can personally to her.
3.Can you write down I said number?
自己翻译出来的，希望对你有帮助

1. Hold on for a moment please, I'll find the FTD (foreign trade department )manager for you.
2. Please take the phone number of the manager of FTD, you could talk to him (or her) directly.
3. Could you take down the number?

1、please hold on, I will put you through the Foreign Trade Department Manager.
2、I give you the phone number of FTD manager, you may talk to her directly.
3、could you write down the phone number I give you?

Hold on please, I will reach the Foreign Trade Department Manager for you.
I'll give you the phone number of foreign trade department, you can talk to her by yourself
Can you write down the phone number

---

汉译英，请各位高手翻译以下句子。杜绝在线翻译！！！视频